3520 South State Street, Salt Lake City, Utah 84115

Call Us (801) 268-0919

Guaranteed Satisfaction

Rated A+ from the BBB

J-Mac Radiator technicians are ASE Certified

Schedule an Appointment

Submitting Form...

The server encountered an error.

Form received.

Captcha Image

Utah Auto Coolant Service

Salt Lake City, Utah Auto Coolant Service and Repair

J-Mac Radiator specializes in car coolant system service and maintenance. We can fix any car coolant system problem.


How can we help you with your car coolant system problems?

If your car has been overheating, Heater is not blowing hot, or if it has been a while since your last coolant system service, bring your vehicle to J-Mac Radiator and let the trained professionals help maintain your engine.

We provide the most thorough cooling system flush in the Salt Lake Valley! Part of our process includes removing the thermostat in order to flush throughout the engine block, cylinder head and radiator with no obstruction, insuring 100% of old contaminated coolant is removed. Once completed, we top off with your manufacturers recommended antifreeze. This extends the life of the hoses, water pump, heater core, thermostat, radiator and reduces the operating temperature of the cooling system.

While you wait for your vehicle, enjoy the big screen TV, complimentary Wi-Fi and beverages.


Our cooling system flush includes:

• Drain old coolant and dispose properly

• Add flushing agent and water, bring car up to operating temperature

• Change thermostat (if necessary)

• Separately power flush heater core, engine block, radiator and all hoses

• Reattach hoses, replacing clamps as necessary

• Add new coolant and inhibitors

• Pressure test system, inspect system for leaks

In addition, we always provide you with our complimentary J-Mac Radiator maintenance inspection including; topping-off fluids, visually inspect belts for damage, tire pressure, wiper blades, lubricate chassis, exterior light check, as well as clean your front windshield for no additional cost.


Car Coolant System Purpose:

A  cooling system works by sending a liquid coolant through passages in the engine block and heads. As the coolant flows through these passages, it picks up heat from the engine. The heated fluid then makes its way through a rubber hose to the radiator in the front of the car. As it flows through the thin tubes in the radiator, the hot liquid is cooled by the air stream entering the engine compartment from the grill in front of the car. Once the fluid is cooled, it returns to the engine to absorb more heat. The water pump's job is to keep the fluid moving through the tubes.


Car Coolant System Common Problems:

Over time, your vehicle’s cooling system breaks down. Dissimilar metals come under attack and are vulnerable to corrosion and erosion. Corrosion inhibitors fall out and become abrasive, plugging small passages in the radiator's aluminum, iron, solder, steel, copper and brass housing. Water pumps may fail through premature wear caused from solids in the coolant and will need to be replaced.


Special Auto Coolant Service Offer for Web Customers, 10% OFF

Call J-Mac Radiator today! Mention this offer at the front counter. Our number is (801) 268-0919. You can reach us Monday - Friday from 8 AM - 5 PM. We accept all major credit cards.


Bring your car in for an estimate today. J-Mac Radiator is conveniently located at 3520 South State Street, Salt Lake City, UT.

Salt Lake City Auto Coolant Service

Get a Call Back...

Enter your details and we will call you back.

Submitting Form...

The server encountered an error.

Form received.

© 2020 J-Mac Radiator. All Rights Reserved. Privacy Policy | Terms and Conditions